How to Flash Global Firmware on Chinese Samsung Galaxy TriFold
While Samsung is not the first player in the market to introduce triple-folding devices [it was Mate XT Ultimate Design all the way back in 2024], however, the offering from the South Korean gaint mamaged to encapsulate the attention of the masses in such a way that others failed to do, mainly because of its global availability and the undetlying OS [Huawei no longer runs Android].
Getting an OTA Update on Z TriFold Converted to Global from China
However, many users had still imported their Samsung TriFold from China due to its cheaper cost. Unfortunately, they had to face a lot of issues after that, including the inability of Android Auto to work. Fortunately, you can now put all these issues to rest. In this guide, we will show you the detailed step-by-step instructions that will help you flash the Global firmware on your Chinese Samsung Galaxy Z TriFold. Follow along.
- How to Flash Global Firmware on Chinese Samsung Galaxy TriFold Download Global Firmware Flashing Instructions
How to Flash Global Firmware on Chinese Samsung Galaxy TriFold
Before starting, please take a complete device backup. Droidwin and its members wouldn’t be held responsible in case of a thermonuclear war, your alarm doesn’t wake you up, or if anything happens to your device and data by performing the below steps.
Download Global Firmware
The Singapore firmware you download should be the same BIT version as the China firmware your phone currently runs. If you never updated your Chinese phone, then you can use this BIT 1 firmware: SM-F968B/XSP/F968BXXU1AYK8 . However, if you did update the Chinese firmware on your device, you’ll need the BIT 2 firmware: SM-F968B/XSP/F968BXXS2AZA1 .
Flashing Instructions
- To begin with, download and extract the Odin Tool on your PC.
- Now download the official Trifold Singapore (XSP) ROM from above.
- Then, extract the ROM. You’ll get AP, BL, CP, CSC, and HOME_CSC.
- Now enable USB Debugging on your device and then power it off.
- Then press and hold the Volume Up and Down keys. While holding them, connect your device to the PC via USB cable.
- You’ll now get a warning on your device. Press the Volume Up key once to boot to the Download Mode.
- Now launch Odin via its EXE file and load BL, AP, CP, and CSC [don’t load the Home_CSC]. Leave Userdata blank.
- Using CSC will format your device, but Home_CSC wouldn’t. However, as of now you cannot use Home__CSC as a reset is a must.
- Finally, hit Start. The flashing will now start and could take a while. Once done, your device will automatically boot to the OS.
- You may now head over to the Settings menu and check the OS version as well as CSC to verify if the flashing went fine or not.
(Cancel Reply)
Δ
