How to Install One UI 8 WatchFaces on Samsung Galaxy Watch
In this guide, we will show you the steps to install the latest One UI 8 WatchFaces on Samsung Galaxy Watch. So without any further ado, let’s get started.
- Compatible Watches
- Available One UI 8 Watch Faces
- Download One UI 8 Watch Faces
- How to Install One UI 8 Watch Faces on Samsung Galaxy Watch METHOD 1: Via Bugjaeger App METHOD 2: Via Wear Installer 2
Compatible Watches
All the Samsung Galaxy smartwatches that have received the latest One UI 8 update or are slated to receive it in the near future can install these watch faces. So this means all watches from the Galaxy Watch 4 onwards are compatible with these watch faces.
Available One UI 8 Watch Faces
Here are all the available One UI 8 watch faces that you can install onto your Galaxy Watch:
Dynamic Digits One UI 8 Watchface
- Sporty Classic
- Heritage Classic
- Daily Dashboard
- Circle Dashboard
- Minimal Analog
- Minimal Digital
- Dynamic Digits
Download One UI 8 Watch Faces
You may now download the latest One UI 8 watchfaces from the link below [Credits: XDA Senior Member @SadLinusGuy | X User: ThatJoshGuy]
Google Drive
How to Install One UI 8 Watch Faces on Samsung Galaxy Watch
METHOD 1: Via Bugjaeger App
- To begin with, download the desired WatchFace APK from above onto your device.
- Now, download and install the Bugjaeger app on your device.
- Then launch it and tap on the New Connection icon at the top right. Keep this window open.
- After that, head over to Settings > About Watch > Software and tap Software Version 7 times.
- Then go to Developer Options and enable the toggle next to ADB Debugging.
- Next, go to Wireless Debugging and enable it. Then scroll down and tap on ‘Pair New Device’.
- You’ll get the pairing code, IP Address, and Port. So type in the IP Address and Port in the Bugjaeger app and hit Pair.
- Then type in the IP Address, Port, and WiFi Pairing Code in the app and hit Pair.
- Finally, type in the IP Address and Port number and hit Connect. NOTE: The Port number should be from the ‘IP Address and Port’ section of the watch [not from the Pair with Device section]. Your watch should now be connected to your device via Bugjaeger.
- Now, go to the third tab of Bugjaeger and hit the Plus icon at the bottom right.
- Now choose Select APK file, select the desired APK, and it will be installed.
- Now launch the Galaxy Wearable app on your device, go to Faces, and scroll down to the Downloads section.
- Then just tap on the desired watch face. It will be installed on your watch right away.
- For example, we have installed the Dynamic Digits One UI 8 watch face on our Galaxy Watch 4.
METHOD 2: Via Wear Installer 2
UPDATE: For now, the Wear Installer 2 app is unable to install the One UI 8 WatchFaces. So consider using the METHOD 1 [Bugjaeger app] to get this job done.
- To begin with, download the desired WatchFace APK from above onto your device.
- Next up, download and install the Wear Installer 2 app from the Play Store. Then launch it and keep it open.
- After that, head over to Settings > About Watch > Software and tap Software Version 7 times.
- Then go to Developer Options and enable the toggle next to ADB Debugging.
- Next, go to Wireless Debugging and enable it. Then scroll down and tap on ‘Pair New Device’.
- Then launch it, note down the IP Address, and type it in the Wear Installer 2 app.
- Now, tap on the overflow icon and select Pair with Watch.
- Then tap Enable. Now type in the pairing code and pairing port in the app, which is shown on the watch.
- You’ll now be taken to the app’s main page. Over there, type in the pairing code which is shown in the watch’s IP Address and Port section [and not the one which was shown in the Pair New Device section].
- Finally, hit Install. The app will now be installed on your watch [this might take some time, depending on the file’s size]. Once done, hit Finish.
- That’s it. You may now launch the app from your watch and close ADB Debugging as well [optional, but recommended as it will save your watch’s battery].
- Now that the pairing is done, from the next time onwards, whenever you want to install any APK on your watch, then just enter the port number from the IP Address and Port section of the watch, see below, [and not the Pair New Device section of the watch] in the app and hit Done. Use IP Address and Port from here from subsequent times
- How to Install Gemini on Samsung Galaxy Watch
- GBoard not working on Galaxy Watch 6/5/4: Is there a Fix?
- How to Backup Samsung Galaxy Watch via Pixel Device
- Cannot Pair Galaxy Watch with Rooted Device: How to Fix
(Cancel Reply)
Δ
