Unbrick Poco F5 Pro/Redmi K60 Via Fastboot Commands

In this guide, we will show you the steps to unbrick your Poco F5 Pro/Redmi K60 via Fastboot Commands. The Poco series has always been known ot be among the most active players in custom development. With around three custom recoveries [PitchBlack, OrangeFox , and TWRP ], the ability to easily gain administrative privileges via root, and the presence of a plethora of custom ROMs , well there’s not much left to ask.

However, this is just one side of the coin. There’s always a chance of things going south and the device going into a bootloop or softbrick state. Fortunately, there’s still a handy way out. You could easily unbrick your Poco F5 Pro/Redmi K60 by flashing the stock firmware [or Fastboot ROM to be more precise] via Fastboot Commands. And in this guide, we will show you how to do just that. So without further ado, let’s get started.

• Unbrick Poco F5 Pro/Redmi K60 via Fastboot Commands STEP 1: Download Android SDK STEP 2: Download Poco F5 Pro Fastboot ROM STEP 3: Move Poco F5 Pro/Redmi K60 Fastboot ROM Files to ADB Folder STEP 4: Boot Bricked Poco F5 Pro/Redmi K60 to Fastboot Mode STEP 5: Unbrick Poco F5 Pro/Redmi K60 via Fastboot Commands

Unbrick Poco F5 Pro/Redmi K60 via Fastboot Commands

The below instructions are listed under separate sections for ease of understanding. Make sure to follow the same sequence as mentioned. Droidwin and its members wouldn’t be held responsible in case of a thermonuclear war, your alarm doesn’t wake you up, or if anything happens to your device and data by performing the below steps.

STEP 1: Download Android SDK

To begin with, download and install the Android SDK Platform Tools . This is the official ADB binary file provided by Google and is used to execute ADB and Fastboot Commands. So download and then extract it to any convenient location on your PC. Doing so shall give you the platform-tools folder, which we will be using throughout this guide.

STEP 2: Download Poco F5 Pro Fastboot ROM

Next up, download the Fastboot ROM for your device. As for this guide, I am using Poco F5 Pro V14.0.4.0.TMNMIXM Fastboot ROM Global version. You are free to try any version of your choice, but it is recommended to try the newer builds only. To download the firmware, you may use the official MIUI Forum .

If that is inaccessible, you may also take the help of a third-party site such as Xiaomi Firmware Updater . Furthermore, if you wish to understand the Xiaomi Fastboot firmware version, you may refer to our comprehensive guide on What is MIUI Fastboot ROM for Xiaomi, Mi, Redmi, and Poco Devices . Or here’s the instruction in short:

• 14.0.4.0– Firmware version
• T – Android version (T-> Android 13).
• MN – Smartphone model code (MN= Poco F5 Pro)
• MI – Firmware build type (CN for China | IN for India | MI for Global | EU for Europe)
• XM – Firmware version code​

Now that you have got hold of the required firmware file, proceed ahead to the next step to unbrick Poco F5 Pro/Redmi K60 via Fastboot Commands.

STEP 3: Move Poco F5 Pro/Redmi K60 Fastboot ROM Files to ADB Folder

1. To begin with, extract the downloaded firmware file. Once the extraction is complete, you should see the following files:
2. So head over to the Images folder and copy all the files to the platform-tools folder.
3. Once done, proceed to the next step to unbrick your Poco F5 Pro/Redmi K60 via Fastboot Commands.

STEP 4: Boot Bricked Poco F5 Pro/Redmi K60 to Fastboot Mode

1. To begin with, you will have to boot your device to the Fastboot Mode. The first step for that requires you to power it off.
2. If you cannot do so (due to your device being stuck in a bootloop) then the only option left is to let the entire battery drain out.
3. Once your device has turned off, press and hold the Volume Down and Power buttons for a few seconds.
4. This will boot your device to Fastboot Mode and you should see the Fastboot text on your screen.

STEP 5: Unbrick Poco F5 Pro/Redmi K60 via Fastboot Commands

To begin with, head over to the platform-tools folder, type in CMD in the address bar, and hit Enter. This will launch the Command Prompt. Now type in the following three commands, one at a time, in this CMD window to flash the stock firmware files to their respective partitions. If you get any error after executing any of these commands, then don’t leave the process mid-way. Rather, continue executing the rest of the commands and then check the results. Moroever, the first command [fastboot -w] will wipe off all the data from your device and it’s recommended that you “don’t” skip it.

fastboot -w



fastboot erase boot_ab 

fastboot erase opconfig 

fastboot erase opcust



fastboot flash abl_ab abl.elf

fastboot flash xbl_ab xbl_s.melf 

fastboot flash xbl_config_ab xbl_config.elf 

fastboot flash shrm_ab shrm.elf 

fastboot flash aop_ab aop.mbn 

fastboot flash aop_config_ab aop_devcfg.mbn 

fastboot flash tz_ab tz.mbn 

fastboot flash devcfg_ab devcfg.mbn 

fastboot flash featenabler_ab featenabler.mbn

fastboot flash hyp_ab hypvmperformance.mbn 

fastboot flash uefi_ab uefi.elf 

fastboot flash uefisecapp_ab uefi_sec.mbn 

fastboot flash modem_ab NON-HLOS.bin 

fastboot flash bluetooth_ab BTFM.bin 

fastboot flash dsp_ab dspso.bin 

fastboot flash keymaster_ab keymint.mbn 

fastboot flash qupfw_ab qupv3fw.elf 

fastboot flash multiimgoem_ab multi_image.mbn 

fastboot flash multiimgqti_ab multi_image_qti.mbn 

fastboot flash cpucp_ab cpucp.elf 

fastboot flash rtice rtice.mbn 

fastboot flash logfs logfs_ufs_8mb.bin 

fastboot flash rescue rescue.img 

fastboot flash storsec storsec.mbn 

fastboot flash toolsfv tools.fv 

fastboot flash xbl_ramdump_ab XblRamdump.elf 

fastboot flash xbl_sc_test_mode xbl_sc_test_mode.bin



fastboot erase imagefv_ab



fastboot flash imagefv_ab imagefv.elf 

fastboot flash super super.img 

fastboot flash vendor_boot_ab vendor_boot.img 

fastboot flash dtbo_ab dtbo.img 

fastboot flash vbmeta_ab vbmeta.img 

fastboot flash vbmeta_system_ab vbmeta_system.img



fastboot erase metadata



fastboot flash metadata metadata.img 

fastboot flash userdata userdata.img 

fastboot flash vm-bootsys_ab vm-bootsys.img 

fastboot flash cust cust.img 

fastboot flash recovery_ab recovery.img 

fastboot flash boot_ab boot.img 

fastboot flash misc misc.img



fastboot set_active a 

fastboot reboot

• How to Enable 5G in Android in an Unsupported Country
• How to Enable VoLTE and VoWiFi on Xiaomi (Root/Non-Root)
• Enable the Hidden Add Multiple Users Option in MIUI (Xiaomi)
• Enable Choose Update Package | Reboot to Recovery Mode: MIUI Xiaomi

• mikhael 2 years ago Reply I did all these command lines and now my phone doesnt even turn on in fastboot, he is just black and black for the eternity, what can i dOOOOOO
• Yahya 3 years ago Reply Does this method work if the bootloader is locked? hah 2 years ago Reply you must unlock the bootloader first.however,it is much easier than root,it just need some times

(Cancel Reply)

Δ