Unbrick Redmi K50 via Fastboot Commands

In this guide, we will show you the steps to unbrick your Redmi K50 via Fastboot Commands. The Redmi K50 has carried forward the legacy of the Chinese OEM’s K series. Beholding an impressive specs sheet, it seems to have struck a right chord with the audience, and a major attribution for the same goes to the company’s aggressive pricing strategy.

Not only with the general audience, but the device also seems to have left a long-lasting impression on tech enthusiasts as well. Be it for flashing custom/GSI ROMs, installing a custom recovery like TWRP, or gaining access to the system partition by rooting the device via Magisk , there’s a lot to look forward to. Moreover, once you have obtained root, you could flash Magisk modules, Xposed Frameworks, and a truckload of nifty tweaks.

However, all these come with a risk factor. If not flashed correctly, then there’s a chance of your device ending up in soft-bricked or bootloop. Fortunately, you could even then unbrick your Redmi K50 by flashing the stock firmware via Fastboot Commands. And in this guide, we will show you how to do just that. Follow along.

• Unbrick Redmi K50 via Fastboot Commands STEP 1: Download Android SDK STEP 2: Download Redmi K50 Fastboot ROM STEP 3: Move Redmi K50 Fastboot ROM Files to ADB Folder STEP 4: Boot Bootloop/Bricked Redmi K50 to Fastboot Mode STEP 5: Unbrick Redmi K50 via Fastboot Commands

Unbrick Redmi K50 via Fastboot Commands

The below instructions are listed under separate sections for ease of understanding. Make sure to follow the same sequence as mentioned. Droidwin and its members wouldn’t be held responsible in case of a thermonuclear war, your alarm doesn’t wake you up, or if anything happens to your device and data by performing the below steps.

STEP 1: Download Android SDK

To begin with, download and install the Android SDK Platform Tools . This is the official ADB binary file provided by Google and is used to execute ADB and Fastboot Commands. So download and then extract it to any convenient location on your PC. Doing so shall give you the platform-tools folder, which we will be using throughout this guide.

STEP 2: Download Redmi K50 Fastboot ROM

Next up, download the Fastboot ROM for your device. As for this guide, I am using Redmi K50 China MIUI V13.0.21.0.SLNCNXM [ Direct Download Link ]. You are free to try any version of your choice, but it is recommended to try the newer builds only and of your region. To download the firmware, you may use the official MIUI Forum .

Or if that is inaccessible, you may also take the help of a third-party site such as Xiaomi Firmware Updater. Furthermore, if you wish to understand the Xiaomi Fastboot firmware version, you may refer to our comprehensive guide on What is MIUI Fastboot ROM for Xiaomi, Mi, Redmi, Poco Devices . Or here’s the instruction in short,

• 13.0.21.0– Firmware version
• S – Android version (S-> Android 12).
• LN – Smartphone model code (LN= Redmi K50)
• CN – Firmware build type (CN for China | IN for India | MI for Global | EU for Europe)
• XM – Firmware version code​

Now that you have got hold of the required firmware file, proceed ahead to the next step to unbrick Redmi K50 via Fastboot Commands.

STEP 3: Move Redmi K50 Fastboot ROM Files to ADB Folder

1. To begin with, extract the downloaded firmware file. Once the extraction is complete, you should see the following files:
2. So head over to the Images folder and the following files will be present there:
3. Select all these files via Ctrl+A shortcut keys and copy them to the platform-tools folder. This is the same folder that you have got after installing the Android SDK.
4. Once done, proceed to the next step to unbrick your Redmi K50 via Fastboot Commands.

STEP 4: Boot Bootloop/Bricked Redmi K50 to Fastboot Mode

1. To begin with, you will have to boot your device to the Fastboot Mode. The first step for that requires you to power it off.
2. If you cannot do so (due to your device being stuck in a bootloop) then the only option left is to let the entire battery drain out (remember the good old days when we could easily remove the battery!).
3. Once your device has turned off, press and hold the Volume Down and Power buttons for a few seconds.
4. This will boot your device to Fastboot Mode. You should see the famous Mi Bunny Logo with the Fastboot text underneath it.

STEP 5: Unbrick Redmi K50 via Fastboot Commands

To begin with, head over to the platform-tools folder, type in CMD in the address bar, and hit Enter. This will launch the Command Prompt. Now type in the following three commands, one at a time, in this CMD window to erase the data on boot_ab and expdb partitions as well as the metadata:

fastboot erase boot_ab

fastboot erase expdb

fastboot erase metadata

Once done, you may now execute the below commands to flash the stock firmware files to their respective partitions. As before, make sure to copy-paste one command at a time. Moreover, if you get any error after executing any of these commands, then don’t leave the process mid-way. Rather continue executing the rest of the commands and then check the results.

fastboot flash preloader1 preloader_rubens.bin

fastboot flash preloader2 preloader_rubens.bin 

fastboot flash vbmeta_ab vbmeta.img 

fastboot flash vbmeta_system_ab vbmeta_system.img 

fastboot flash vbmeta_vendor_ab vbmeta_vendor.img 

fastboot flash md1img_ab md1img.img 

fastboot flash spmfw_ab spmfw.img 

fastboot flash mcf_ota_ab mcf_ota.img 

fastboot flash audio_dsp_ab audio_dsp.img 

fastboot flash pi_img_ab pi_img.img 

fastboot flash dpm_ab dpm.img

fastboot flash scp_ab scp.img 

fastboot flash ccu_ab ccu.img 

fastboot flash vcp_ab vcp.img

fastboot flash sspm_ab sspm.img 

fastboot flash mcupm_ab mcupm.img 

fastboot flash gpueb_ab gpueb.img

fastboot flash apusys_ab apusys.img 

fastboot flash mvpu_algo_ab mvpu_algo.img 

fastboot flash gz_ab gz.img 

fastboot flash lk_ab lk.img 

fastboot flash vendor_boot_ab vendor_boot.img 

fastboot flash dtbo_ab dtbo.img 

fastboot flash tee_ab tee.img 

fastboot flash logo_ab logo.bin 

fastboot flash super super.img 

fastboot flash cust cust.img 

fastboot flash rescue rescue.img 

fastboot flash userdata userdata.img

fastboot flash boot_ab boot.img



fastboot set_active a

fastboot reboot

The second last command will set your active partition to A and the last command will automatically boot your device to the OS. However, if your device is still not booting to the OS, then you will have to take the nuclear approach of factory resetting your device (which will delete all the data). So with your device booted to Fastboot Mode, execute the below command to wipe your device:

fastboot -w

• How to Enable 5G in Android in an Unsupported Country
• How to Enable VoLTE and VoWiFi on Xiaomi (Root/Non-Root)
• Enable Hidden Add Multiple Users Option in MIUI (Xiaomi)
• Enable Choose Update Package | Reboot to Recovery Mode: MIUI Xiaomi

(Cancel Reply)

Δ